Accessories for conveyor technology

Frequency converters are used to regulate the speed of conveyor belts, sorting machines or automation systems. In addition to standard MTF units, customised models are available.

The singulation cylinders are generally equipped with a pressure plate coated with an adhesive layer. This plate presses laterally against the conveyed material to accumulate it or to create a gap between the conveyed items.

Side guide made of anodized aluminum, mounted on the inside of the guide profile.

Interfaces between MTF conveying or automation equipment and customer-supplied production facilities are defined on a project-specific basis.

To protect operators, machines and products from the harmful effects of electrostatic discharge, various ionization devices from different manufacturers are mounted on the conveyor belts and separating devices.

Jet pipes are used in conjunction with a submersible pump on water conveyor belts to guide parts towards the conveyor belt using a targeted jet of water. The flow rate can be regulated via a valve.

Clear labeling and identification of drives, sensors, etc. is part of the documentation.

Reliable monitoring is ensured by mechanically operated limit switches, which are primarily used in the transport of containers.

Longitudinal covers over corrugated edges – here made of stainless steel – are applicable with a fixed conveying angle. The longitudinal covers prevent the conveyed material from getting behind the corrugated edge.

Magnetic drive rollers are used in conveyor belts to remove metallic contaminants from the conveyed material. They are maintenance-free and require no power supply.

Project-specific controls ensure easy operation of the MTF systems.

Removal buttons are often mounted on robot conveyor belts to transport components from a protective enclosure to the operator.

Motor protection switch with emergency stop push button - standard version for constant speed devices.

The deflection roller of a conveyor belt is monitored via an initiator and sends a signal to a higher-level control system for each revolution.

Swiveling discharge chute at the outlet of a separating drum for targeted part routing

Part centering is achieved using spring-loaded plastic strips resting on the belt.

MTF products are often equipped with pneumatic components, e.g. as stop or centering devices or for directing flow.

The flap closes the outlet of a multi-rounder slide, for example, if the parts supply cannot be interrupted during the position change.